Monday, 2013-04-29

--- Day changed Mon Apr 29 2013
-!- rikanee [~rika@unaffiliated/rikanee] has joined #ubiboot02:50
rikaneejuiceme: I'd be interested to try taming the watchdoggies.02:50
-!- faenil [~faenil@dynamic-adsl-78-12-99-230.clienti.tiscali.it] has quit [Ping timeout: 272 seconds]10:13
@juicemerikanee, :)10:15
rikaneejuiceme: I've also been trying to boot a custom kernel on Harmattan, but it simply bombs out.10:18
rikaneeIt's the stock PR 1.3 kernel with Aegis patches and 2.6.32.55 patched on top.10:19
-!- faenil [~faenil@dynamic-adsl-78-13-108-51.clienti.tiscali.it] has joined #ubiboot10:23
@juicemerikanee, do you have access to serial console?10:38
rikaneejuiceme, nope.10:38
rikaneeI'm a bit squeamish to grab my breakout plugs and solder them to my N9 and motherboard.10:39
@juicemeand I think I remember you said earlier that you were building a kernel that writes debug log to the display console when device is booting?10:39
rikaneejuiceme: tried that, no display even during the decompression stage.10:39
@juicemewere you successful with that as I never managed to do it muself...10:39
@juicemeyes, same with me.10:40
rikaneegod, harmattan is such a PITA to work with, I'll try booting Nemo with this instead10:40
rikaneefiguring out how to boot Harmattan with 32.60 kernel would be another exercise after I get everything nice and actually working10:41
@juicemeabout the soldering, I also thought first of that but JOnni adveced me that it's possible to build an adapter ot the simslot that lets you access the serial pins.10:41
JonniI'm also thinking of makeing a short howto video howto access n950 serial pins without soldering... but lets see10:41
@juicemeSo what I did is I ordered Nokia CA-42 adapter which is USB/TTL-level-RS232 converter and a spare sim tray from ebay.10:42
@juicemegot the goods just last week, so now I need to build the adapter :)10:42
@juicemeI am thinking of dismantling another phone to rip the springed contacts used for SIM access, and solder/glue those to the simtray in correct position.10:44
@juicemeJokki, what did you use for contact pins in your adapter?10:45
@juicemes/Jokki/Jonni/10:45
rikaneejuiceme: by the way, what was that watchdog fix you were talking about?10:47
Jonniheh mun eka versio oli kunnon hacki, jossa sulatin piuhat muoviliuskan sisään ja tinasin kohoumat oikeille paikoille. Ja pro versiossa mulla on jousiliittimet.10:48
@juicemerikanee, well, the thing is that on my device I never had any watchdog-related problems but Jonni adviced me that there was some timeout that caused the device to boot after a short delay when it was displaying the menu screen. So, on the (yet unreleased 090413 version) I added watchdog feedig which should help with that. I guess you troied it?10:51
@juicemeJonni, the soldering way is the easiest, you just need a steady hand and thin-bladed iron :)10:52
rikaneeI haven't seen the 090413 version, but I am getting the 'reboot on menu screen' on all kernels, just slightly more frequently with ones patched for L2 enable10:52
@juicemeBut I am aiming to make a spring-contact version. I just need to center the contact pins correctly.10:53
@juicemerikanee, try getting http://www.swagman.org/juice/zImage_2.6.32.54-ubiboot-02_09041310:54
@juicemetell me if that's behaving differently10:54
rikaneeAlright, I'll try that.10:55
@juicemeJonni, I still am not sure where to connect GND pin, which of the slices next to tx&rx pins is OK?10:55
rikaneejuiceme: soldering pads/breakout sockets to where "Nokia N9" and other product info stickers are could work too10:55
rikaneethe pads/sockets would always be there, no need to change SIM slots10:56
rikanee(you will need to hurt your N9 though)10:57
@juicemeI was not aware of that, so there are pins behind the sticker?10:58
@juicemeor do you mean, just drill a hole @that_location and just draw the wire thry it to the contacts under the sim tray?11:00
rikaneethe latter.11:00
rikaneePutting cables into the SIM tray sounds like asking for potential snags.11:01
@juicemeBut with an adapter it's possible to debug other devices, and compare boot log for example on a device that refuses to boot.11:01
rikaneeah.11:02
rikaneealright, flashed the new 090413 build, going to test L2 patched kernels.11:03
@juicemefingers crossed...11:04
rikaneestill crashed, LED remained on, and returned to ubiboot menu.11:05
@juiceme...11:05
@juicemetoo bad.11:05
rikaneeOdd, it seemed to /lag/ while pulsing the Nokia logo, and then rebooted.11:05
@juicemeBut you are able to boot the open mode kernel without L2fix?11:05
rikaneeOccasionally, trying to boot the cloud-7 open mode kernel now.11:06
@juicemerikanee, what's the HWREV of your device, is it 1603?11:07
rikaneethere, it booted, but mthome launches painfully slowly. which sucks.11:08
rikanee1507.11:08
@juicemeOkay, that's a new one for me.11:08
@juicemeno, am mistaken. valdur55 also has 1507, and he had some problems with it.11:10
@juicemeis it 16G or 64G, and what colour device?11:11
rikanee16G Black, the ones handed out for CA ;)11:11
-!- Jonni [~rainisto@linuxi.org] has quit [Quit: http://quassel-irc.org - Chat comfortably. Anywhere.]11:47
-!- Jonni [~rainisto@2001:41d0:1:b16c::4] has joined #ubiboot11:48
@juicemeJonni, I still am not sure where to connect GND pin, which of the slices next to tx&rx pins is OK?11:57
ToAruShiroiNekojuiceme I dont know how to check what I have14:49
ToAruShiroiNekoI am not ignoring here its just that too much is happening at once :(14:49
@juicemeToAruShiroiNeko, hi14:51
@juicemeI am not sure now what you are referring to?14:52
faenilsame here, lag with pulsing logo, and then reboot (l2fix kernel)15:48
-!- faenil_ [~faenil@dynamic-adsl-78-13-110-178.clienti.tiscali.it] has joined #ubiboot20:32
-!- faenil [~faenil@dynamic-adsl-78-13-108-51.clienti.tiscali.it] has quit [Ping timeout: 256 seconds]20:35
Jonnijuiceme: both pins next to tx & rx are grounds if I remember right20:58
-!- faenil_ [~faenil@dynamic-adsl-78-13-110-178.clienti.tiscali.it] has quit [Quit: I'm leaving]21:53
@juicemeJonni, thanks. In the schematics those pins are J5600 and J5610, and I could not find those anywhere so I suppose the pins can both be ground then.22:05
valdur55Yep. I can't boot l2fixed kernel with ubiboot. I can use l2fixed kernel when i flash it in phone22:13

Generated by irclog2html.py 2.12.1 by Marius Gedminas - find it at mg.pov.lt!